Amplificador Alpine MRP-M352 | Marca: ALPINE |  | Features
- 1 Channel Operation
- BassEngine®
- Subsonic Filter
- Bass EQ Circuit
- Crossover (LP)
- MOSFET Power Supply
- DC-DC PWM Power Supply
- Discrete Pre-Amp Stage
- Double Buffered Pre-Amp Input Circuitry
- STAR Circuitry
- Top Mounted Blue LED Power/Status Indicator
- Continuously Adjustable Gain Control
- Speaker Level Inputs
- Gold Plated Power Screw Terminals
Gold Plated Speaker Terminals
- Cross-Vented Chassis Design
CEA-2006 Power Rating
- CEA-2006 Power Rating (40hm at 14.4V = 1%THD+N), S/N 60dBA (Ref. 1W into 4Ohm): 200x1
RMS Power (at 14.4V THD+N, 20Hz-200Hz)
- Per channel into 4 ohms: 200W x 1 (1.0% THD)
- Per channel into 2 ohms: 350W x 1 (1.0%)
- Total Max. Power: 700W
BassEngine® Sound Tuning
- Crossover Network: 18dB/oct
- Low Pass Crossover Frequency (Adjustable): 50Hz – 200 Hz
- Subsonic Filter (Fixed): 15Hz @ 24dB/oct.
- Bass EQ Frequency (Fixed): 50Hz
- Bass EQ Level (Adjustable): 0 - 12dB
General
- Power Requirements: 14.4V DC (11V to 16V)
- Frequency Response: 20Hz – 200kHz (+0, -3dB)
- Signal to Noise (S/N): 90dBA (referenced to rated power)
- Input Sensitivity (For Rated Power): 0.2V to 4.0V
- Input Impedance: 10k Ohm
- Speaker Impedance: 4 or 2 Ohm (Stereo)
- Dimensions (WxHxD): 199mm x 60mm x 267mm
- Dimensions (WxHxD): 7-4/5" x 2-2/5" x 10-1/2"
- Weight: 2.52 Kg. (5 lbs. 9 oz)
| |
|
|