• Max. power output (sine burst 2:8, 1 Khz) @ 4 ohms, 14.4 V 4 x 200 Watts / 2 x 500 Watts
• RMS power output (DIN 45 324) @ 4 ohms, 14.4 V 4 x 65 Watts / 2 x 170 Watts
• Max. power output (sine burst 2:8, 1 kHz) @ 2 ohms, 14.4 V 4 x 250 Watts
• RMS power output (DIN 45 324) @ 2 ohms, 14.4 V 4 x 85 Watts
• Frequency response 5 Hz - 50 kHz (-3 dB)
• THD < 0,05 % (1kHz)
• Signal-to-noise ratio (A-weighted) > 100 dB
• Input sensitivity 0,4 V - 4 V
• Input impedance 20 kOhms
• Power Supply 12 V negative ground
• Dimensions (WxHxD) 380 mm x 52 mm x 290 mm
• Weight 3.75 kg
Generales
•
2 ohm stable
• Variable low and high pass 40 – 300 Hz (12 dB per octave):
• Variable bass boost 0...12 dB at 45 Hz
• Low level RCA outputs provide summing signal of channel 1 to 4 for use with a subwoofer amplifier (Four & Four limited)
• Bridge-/Tri-mode capability
• Channel mode selector switch (4/3/2-CH mode)
• Encapsulated power and speaker connectors
• Toshiba power audio transistors
• Protection circuit that safeguards against short circuits,DC-offset and overheating
• Green operation and red protection indication LED
