Amplificador Vibe Black Box Bass 5 | Marca: VIBE |  |
|
Specifications* |
BASS 5 |
|
RMS Out @4ohm mono |
750 w |
|
RMS Out @2ohm mono |
1500 w |
|
RMS Out @1ohm mono |
1350 w |
|
Signal To Noise Ratio |
90 dB |
|
Frequency Response |
10 - 250 Hz |
|
Total Harmonic Distortion |
0.1% |
|
Crosover Type |
LP/subsonic |
|
Crossover Range |
30 - 250 Hz |
|
Crossover Slope |
24dB |
|
Parametric - Bass Enhance |
15dB |
|
Max Power |
3000 w |
|
Height |
57 mm |
|
Width |
580 mm |
|
Depth |
224 mm |
-
-
-
-
DSP (Digital Signal Processing) controlled amplifier
-
Unprecedented sound quality for huge power BASS amps
- Advanced 4 Layer circuit board
- True mono design for optimum single channel driving
- Maximum power delivered at 2ohm as opposed to unstable high distortion 1 ohm amps
- 24 db per octave low pass crossovers
- Crossover range 30Hz 250Hz
- Subsonic filters to remove unwanted frequencies10Hz 80Hz
- Excellent signal to noise ratio of up to 114 dB
- Total harmonic distortion as low as 0.1%
- Fan assisted ICC Internal Convection Cooling
- 0 180 degree phase switch
- Parametric bass boost variable between 10Hz and 125Hz
- Strapable amplifier circuit allows 2 amps to be combined as 1 big amplifier
- End caps with illuminated Blackbox logo indicates amplifier status
- Remote level control BBR1 included
| |
|
Pack Vibe Slick Stereo 4Conjunto VIBE compuesto por:
-
- Amplificador Vibe Slick A4, 4x150/250 w. RMS 4/2 Ohm., Diseño Slick engomado, Crossover pasa altos+pasa bajos
-
- Altavoces Vibe SE-K60. Kit 2 vias separadas 165mm. DIN, Cono Kevlar, Filtro externo, 115/345w., 90 dB., 55-20000 Hz.
-
- Caja Vibe SLR-12, caja Cerrada 12", 4 Ohm., Woofer Slick, 400/1200w.
-
- KIt de cables
Altavoces Phase PCS-162Altavoces 6.5"/165mm. DIN 2 Vías, 90/135w., 4 Ohm., 91 dB.
OFERTA HASTA FIN DE EXISTENCIAS !!!! 85,00 €
Más ofertas |
|